Get Training Agreement Data

Get Training Agreement Data

Path Parameters
trainingAgreementLocalId string — REQUIRED The training agreement local identifier.

Header Parameters
EID string — REQUIRED Enter the EDUMIS (Organisation) ID

Responses
200 The operation returned successfully. Schema — OPTIONAL learnerLocalId string — OPTIONAL Learner Local ID A code which uniquely identifies the learner within each TEO, as captured in a TEO’s TMS system. The Learner Local ID must remain constant for the learner throughout their enrolment history at your organisation. Note: This field has been renamed from ‘Local ID’ to ‘Learner Local ID’ Length: 20 Type: String Guidance: This number must be the unique value generated by each TEO via their TMS. Both ‘Learner Identification Code’ and ‘Learner Local ID’ cannot both be NULL. trainingAgreementLocalId string — OPTIONAL Training Agreement Local ID A unique identifier issued by the TEO that identifies the training agreement between the TEO, employer, and learner for a specific training agreement signed date Length: 20 Type: String Guidance: A programme enrolment must also exist and be submitted with any new training agreement. trainingAgreement object — OPTIONAL employerNzbn string — OPTIONAL Employer NZBN The New Zealand Business Number issued by GS1 New Zealand to the organisation the learner is employed with. This field helps to identify an employer. Type: String Guidance: Enter your NZBN if applicable. employerName string Possible values: 1 ≤ length ≤ 255 Employer Name The name of the employer. Must be the legal name of the organisation that is employing the learner. Where the employer has multiple sites, this must be the name the parent or head office is known by. Length: 255 Type: String Guidance: Must be the legal name of the organisation that is employing the learner. Where the employer has multiple sites, this must be the name the parent or head office is known by. employerSubdivisionName string — OPTIONAL Possible values: length ≤ 255 Employer Subdivision Name The name of the subdivision a learner is working for where the employer has multiple sites. Length: 255 Type: String Guidance: Enter in the name of the subdivision if known or applicable. employmentRegionCode int32 Employment Region Code A code defined by Statistics New Zealand that identifies the Region the Learner’s place of employment is located in. Type: Integer Guidance: Select a value from the Statistics New Zealand Regional Council (Generalised) 2023 classification. The Region classification is available at NZ Statistics: Regional Council (Generalised) 2023. They are also listed in the DXP Data Classifications Appendices. employmentTerritorialAuthorityCode int32 Employment Territorial Authority Code A code defined by Statistics New Zealand that identifies the Territorial Authority the Learner’s place of employment is located in. This is a new field that will provide a lower level of detail on where learners are employed. Type: Integer Guidance: Select a value from the Statistics New Zealand Territorial Authority (Generalised) 2023 classification. Note: There is only a single Territorial Authority Code for Auckland. There is no further breakdown of geography within the Auckland Territorial Authority area. The Territorial Authority classification is available at NZ Statistics: Territorial Authority (Generalised) 2023. They are also listed in the DXP Data Classifications Appendices. employmentTypeCode string Possible values: 1 ≤ length ≤ 3 Employment Type Code A code that identifies the nature of the learners’ employment relationship with their employer. Length: 3 Type: String Guidance: Select a value from the list below: E: Employee SS: State Sector V: Volunteer SE: Self Employed. employerIndustryCode string Possible values: 1 ≤ length ≤ 20 Employer Industry Code Each programme must identify the industry or industries the programme is intended for. Employer Industry Code (ANZSIC) is defined by Statistics New Zealand and identifies the industry the learner is primarily working in. Length: 20 Type: String Guidance: Select a value from the Statistics NZ Australian and New Zealand Standard Industrial Classification 2006 V1.0.0 level 4 list for your organisation. Note: Please select the most appropriate value as only one value is required. The value selected can be different to that on the Programme. The Industrial classification is available at NZ Statistics: Australian and New Zealand Standard Industrial Classification 2006 V1.0.0. They are also listed in the DXP Data Classifications Appendices. learnerOccupationCode int32 Learner Occupation Code Each training agreement must identify the occupation of the learner. Learner Occupation Code is defined by the TEC and identifies the occupancy the learner is primarily working in. Type: Integer Guidance: Select a value from the TEC Occupation classification list for your organisation. Note: Please select the most appropriate value as only one value is required. The value selected can be different to that on the Programme. The occupation classifications are listed in the DXP Data Classifications Appendices. moeExemptionNumber string — OPTIONAL Possible values: length ≤ 20 MoE Exemption Number If a learner is 15 years of age, they are normally required to be enrolled in secondary education. This element captures a reference number provided by the MOE that identifies an exemption they have granted to a learner to not be in secondary education. Length: 20 Type: String Guidance: MOE Exemption Number must be supplied if learner is 15 years old at time of signing the training agreement. trainingAgreementSignedDate date Training Agreement Signed Date Date the Training Agreement was signed by the learner, employer and TEO. Type: Date Guidance: 2024-04-08 You must use ISO-8601 for your dates. Use the last date the Training Agreement was signed. Training Agreement Signed Date must be on or before the processing date. The learner must be over 16 years old at date the training agreement is signed unless the MOE Exemption Code is supplied. Training Agreement Signed Date must be no older than 120 days from today. If the Training Agreement is the product of an Employer transfer, then the Training Agreement Signed Date of the new Training Agreement must be after the Training Agreement Signed Date of the previous Training Agreement. Also, the new Training Agreement Signed Date must be at least one day after any preceding GRACE status for the previous Training Agreement. originalTrainingAgreementSignedDate date — OPTIONAL Original Training Agreement Signed Date Date the Training Agreement was originally signed by the learner, employer and TEO. Type: Date restartDate date — OPTIONAL Restart Date The date on which the Training Agreement is restarted. Type: Date Guidance: 2024-04-08 You must use ISO-8601 for your dates. Status Change Date must be before or equal to today. Status Change Date must be after the Training Agreement Signed Date. When restarting a Training Agreement from being on ‘Hold’. The ‘Restart’ date must be on or after the date on which the training agreement went on hold. pauseDate date — OPTIONAL Pause Date The date on which the Training Agreement is paused. Type: Date Guidance: 2024-04-08 You must use ISO-8601 for your dates. Status Change Date must be before or equal to today. Status Change Date must be after the Training Agreement Signed Date. Status can be backdated a maximum of three months from the current date. Completions are excluded from this limitation and any backdated events stemming from the receipt of a completion from NZQA can be applied beyond the three-month limit. graceReasonCode string — OPTIONAL Possible values: length ≤ 2 Grace Reason Code Identifies why a Training Agreement has been place in GRACE Length: 2 Type: Character Guidance: A reason code must be provided if status code is GRACE. Please select one of the reason codes below. Reason Code: Description LE: Loss of employment DM: Dismissal RD: Redundancy onHoldReasonCode string — OPTIONAL Possible values: length ≤ 2 On Hold Reason Code Identifies why a Training Agreement has moved into either a HOLD or GRACE Length: 2 Type: Character Guidance: A reason code must be provided if status code is HOLD. Please select one of the reason codes below. Reason Code: Description SW: Seasonal work PL: Parental leave OV: Overseas travel MD: Medical/ACC CI: Attending correctional institution OT: Other ST: Stop training (still with employer) WE: Work Experience withdrawalDate date — OPTIONAL Withdrawal Date Date on which learner withdrew from their Training Agreement Type: Date Guidance: 2024-04-08 You must use ISO-8601 for your dates. An TEO can withdraw a training agreement when the agreement between the learner, employer and TEO ceases before the related enrolments are complete. The effect of withdrawing a training agreement is to withdraw all enrolments within the agreement that are not complete or withdrawn. Training Agreement must have a status of “Pending”, “Active”, “Hold” or “Grace” to be withdrawn. Withdrawal date must be on or after the Training Agreement Signed Date. Withdrawal date must be before or equal to today. Withdrawal date must be on or after the latest participation start date. endDate date — OPTIONAL End Date The date on which the Training Agreement ends. Type: Date Guidance: 2024-04-08 You must use ISO-8601 for your dates. withdrawalReasonCode string — OPTIONAL Possible values: length ≤ 3 Withdrawal Reason Code Identifies the reason why the learner withdrew from their Training Agreement Length: 3 Type: Character Guidance: A reason code must be supplied if a withdrawal date is supplied. Select a value from the list below: BC: Business closed BD: Business downturn CC: Change in career choice AP: Changing from Industry Trainee to Apprentice PT: Changing from Apprentice to Industry Trainee CP: Change of programme DC: Deceased DS: Dissatisfied with employer/industry EW: Exiting the workforce LS: Lack of employer support LA: Length of apprenticeship LI: Linked Enrolment NF: Non-payment of fee OT: Other OD: Over programme duration PC: Parental commitment ST: Stop Training (still with employer) TI: Transfer TEO LE: Loss of Employment trainingAgreementStatus string — OPTIONAL Possible values: length ≤ 20 Training Agreement Status A code which identifies the status of the Training Agreement. Length: 20 Type: String Guidance: Valid status values are below: Pending: A Training Agreement is set to Pending if it has been created for an NZA. Active: Learner is actively participating and engaged in their work-based programme. Associated enrolments that are not “Completed” or “Withdrawn” will accrue EFTS. Grace: TEO helps the learner to complete the programme or obtain another job. Associated enrolments that are not “Completed” or “Withdrawn” will accrue EFTS. Hold: An TEO may place a learner on hold if the learner is not actively training but intends to return to training within a short period of time. Placing a training agreement on hold means that all associated enrolments will no longer accrue EFTS.
400 Bad request. Check errors and codes for more detail. Schema — OPTIONAL type string — OPTIONAL title string — OPTIONAL status int32 — OPTIONAL detail string — OPTIONAL instance string — OPTIONAL errors object — OPTIONAL
401 Unauthorized Schema — OPTIONAL type string — OPTIONAL title string — OPTIONAL status int32 — OPTIONAL detail string — OPTIONAL instance string — OPTIONAL errors object — OPTIONAL
404 Training Agreement. Check Error code for more detail Schema — OPTIONAL type string — OPTIONAL title string — OPTIONAL status int32 — OPTIONAL detail string — OPTIONAL instance string — OPTIONAL errors object — OPTIONAL
429 Rate Limiting may apply. Refer to Retry-After header Schema — OPTIONAL type string — OPTIONAL title string — OPTIONAL status int32 — OPTIONAL detail string — OPTIONAL instance string — OPTIONAL